SN SERIES - The standard of the industry when a Type 321 or 316 stainless steel hose is required. SN is constructed with a close-pitch "omega" design annular corrugation to provide a high degree of flexibility and long life. Available in lengths as long as fifty feet, depending on diameter.

UN SERIES - UN is the most flexible metal hose available anywhere. The unique 10380 approved hose in the world - far surpassing international standards for cycle life and reliability. Available in Type 321 or 316 stainless steel.
 

RUBBER SPHERE
GLOBAL-FLEX STYLE SN,DN,UN Sphere's are precision molded of neoprene and nylon. These units require less force to move than conventional rubber expansion joints allowing maximum deflection, elongation, and compression. The smooth flow arch reduces turbulence and allows quiet flow with out sediment build-up. Sizes range from 2" up to 20" ID pressure to 225 psig, vacuum to 26"Hg and temperature range -20 degree F to 225 degree F. Available in single, double arch design. EPDM required on Temperature more than 175 degree's F

METAL BRAIDED CONNECTORS
Metal braided pump connectors are available in Stainless Steel or Bronze, flanged, threaded, or sweat ends. Designed to absorb pump vibration, noise, and reduce piping stress due to minor misalignment. Available in sizes 1/2" to 20"
 

Global-Flex style REJ Global-Flex style REJ expansion joints are the ultimate in quality hand-built construction. Premium grade elastomers provide long service life in the most demanding applications For superior performance and pressure ratings Global-Flex style REJ expansion joints have a minimum 4 to 1 safety factor built in to their rated operating pressures.
 

Style REJexpansion joints offer an improved 'wide arch' design. Face-to-face measurements of the style REJ expansion joints are equal to that of standard or multi-arch joints, but will accommodate much greater movements.

Style REJexpansion joints are available in size's ranging from 2-1/2" to 56" diameter. Single, dual and triple arch design. Temperatures ranging from 250 to 400 degrees F, and pressures up 300 psig. Hand built using the correct compounding for even the most exotic of applications.
 

Stainless Steel - Expansion joints:

MEJ - Metal Bellow Expansion Joints are available in basic low-corr, mid-corr, and are standard, but multiple ply bellows are available. Either single or dual bellows can be selected, depending on the movement ratings needed. End configurations include weld type, fixed flange, or vanstone. Accessories such as tie rods, shroud covers, and internal liners can be added to fit the application. Material options include 304, 321, and 316 SIS, as well as Inconel, Monel, and other special alloys. Sizes available up to 144" diameter, depending on bellows type.

EJEP - Global-Flex Mfg EJEP Externally Pressurized Expansion Joints are a packless, maintenance free product designed for use in straight runs of pipe to accommodate large amounts of thermal expansion. Within a protective enclosure, external pressure is applied to the bellows via a gap between the internal flange and housing. This pressure keeps the bellows stable. EP Series expansion joints are available in 150# and 300# designs, and with either flanged or weld ends. Both single and dual bellows are available. Drain ports can be added for steam service. Sizes range from 2" to 24" diameter.

CM/CMS - Expansion Compensators, designed to pressurization principal to eliminate bellows squirm. Styles are available for connection to steel piping or copper tubing. Standard end configurations are threaded, copper sweat, or flanged. Sizes range from 3/4" to 4" diameter.

MEJ-CF Controlled-Flexing Expansion Joints combine corrugated metal bellows with mated neck rings and bellows equalizing rings. Corrugation movements are equalized, even at high pressures and large axial movements. Both 150# and 300# pressure styles are available. Internal liners can be added, and external shroud covers installed for safety. Ends include fixed or vanstone flanges, and weld end style. Series MEJ-CF Controlled-Flexing Expansion Joints are manufactured in sizes from 3" to 24", depending on bellows pressure series.

PB/PBR - Series Bellow Pump Connectors utilize a compact face-to-face, multi-ply construction to absorb noise and vibration generated by mechanical equipment. The longer style PBR is manufactured in the same lengths as standard rubber pump connectors, and can offer substantial temperature and pressure advantages over rubber connectors. PB /PBR connectors are built with stainless steel bellows and carbon steel 150# flanges and limit rods.
 

Seismic Connectors:

Style SC Seismic Connectors are the most cost effective way to compensate for the unpredictable pipe movement encountered during seismic activity. The SC stainless steel, and bronze connectors will absorb movement in all directions, ranging from 2", 3", or 4". On some select sizes 7" movement may be available. The flexible legs of our SC connector are calculated to provide 1,000 cycle life far above other seismic connectors available on the market.

Style SC Connectors are available in 321 or 316 stainless steel in sizes 1/2" to 12" pipe diameter. End configurations available are male pipe thread, flanged, and grooved ends.

Bronze SC Connectors are available in sizes 1/2"to 4" pipe diameter. End configuration bronze sweat or male pipe thread.

The unique chevron design of our SC connector allows for easy nesting with no alteration.

Flu-Duct Joints:

GFTC Expansion Joints are Non-Metallic Flue Duct Expansion Joints or flexible connectors, which when properly designed, provide stress relief for piping and ducting systems by absorbing thermal growth & shock, isolating mechanical vibration and allowing for misalignments.

Flue duct expansion joints are custom engineered products designed to handle low-pressure (?5 psig) applications with temperatures from -100 to +2000 deg. F. The expansion joints are manufactured using innovative non-metallic materials and designs.